Panerai Submersible PAM02305

Model #: pam02305 Panerai Submersible 47mm Mens Watch

Brushed stainless steel case Brushed titanium uni-directional bezel: luminous filled dot starting point. engraved 15 minute graduated scale. raised 5 minute indexes. Polished steel hands, partially skeletonized with luminous filled tips. Applied hour markers with luminous fill. Date window located at the 3 o'clock position. Small seconds hand sub-dial at the 9 o'clock position with blued steel hand & luminous indexes. Panerai Caliber P.9010, beats at 28,800 vph, composed out of 200 components, contains 31 Jewels & has an approximate power reserve of 72 hours. Condition : New/Unworn Case Shape : Cushion Case Dimensions : 47mm Case Material : Stainless Steel Dial Color : Black Crystal : Scratch Resistant Sapphire Bezel : Uni-Directional Rotating Water Resistance No ratingDoes not allow contact with water 30m/99ft - 50m/165ftAllows for contact with water such as washing hands and rain 50m/165ft - 100m/330ftAllows for light poolside swimming 100m/330ft - 200m/660ftAllows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ftAllows for impact water sports such as board diving and scuba diving 500m/1650ft +Appropriate for serious deep water diving. Learn more about Water Resistance. Close : 300m/990ft No rating : Does not allow contact with water 30m/99ft - 50m/165ft : Allows for contact with water such as washing hands and rain 50m/165ft - 100m/330ft : Allows for light poolside swimming 100m/330ft - 200m/660ft : Allows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ft : Allows for impact water sports such as board diving and scuba diving 500m/1650ft : Appropriate for serious deep water diving Case Back : Solid Band Material : Rubber Color/Finish : Black Clasp : Tang Buckle Lug Width : 26mm Movement : Automatic An automatic/self-winding movement is powered by a thin spiral torsion spring, called the mainspring, which is housed in an enclosed barrel inside the movement. The energy produced from the wound spring drives the movement functions. An automatic watch has a weighted rotor mounted on a pivot to the back of the movement, and the rotor is connect to the mainspring through a series of gears. The natural motion of the wearers wrist will cause the rotor to spin, which in turn will automatically wind the mainspring. Please note: An automatic winding watch which has completely wound-down or is at the end of its power reserve requires manual winding. Manually winding an automatic watch ensures that the watch is at full power-reserve when first worn, and as long as the watch is in motion thereafter it will remain fully wound, ensuring that when the watch is removed it will run the specificed power-reserve duration. Close